UNI-T UT501 Manual de Instalação descarregar pdf (Página 17)

ANALOG TO AMX-192

In this application, 0 - 10VDC is converted to AMX 192.

CONNECTOR OPERATION

Microplex IN Input Microplex

Microplex OUT Not Used

DMX IN Input DMX 512

**DMX out Output AMX 192

MIDI / Analog 0-10VDC input

Luma-net Not Used

RS-232 Not Used

JUMPER LOCATIONS

P4 & 5 P7 JP6 & 7 JP8 & 9 JP10 JP11 JP12 JP13

OPEN OPEN N/A 2-3 2-3 2-3 N/A 2-3

P6 P8 JP1 DMX OUT CABLE

*CLOSE TO TERM

DMX

N/A N/A JP3

DIPSWITCH POSITIONS

C1 C2 C3 C4 ADDRESS 1 - 7 A8

UP UP DN UP STARTING ADDR OF ANALOG CHAN 1 BY 1 INCREMENT

Four analog 0-10V channels are merged with DMX-512 or Microplex and output as AMX-192.

Channel number of first analog channel is determined by A1-7.

AMX output is sent as either 64 or 128 channels, depending on the setting of switch A8.

*Close P6 if inputting DMX. IF 501 is always last device at end of DMX line.

**IMPORTANT - Move AMX output connector jumper from JP4 to JP3.

INTERFACE UNIT

Software Revision 1.05, Version A ANALOG TO AMX-192

NSI CORPORATION 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 25 26

Sem comentários

UNI-T UT501 Manual de Instalação Página 17